Installation; Figure 2-1: Rear Panels - evertz 7700 Manual

2.

INSTALLATION

The 7702/7703DA4-RF active splitters come with a companion rear plate that has 5 BNC type 75Ω
connectors (F type connectors are optional).
companion rear plate that has 9 BNC type 75Ω connectors (F type connectors are optional).
information on mounting the rear plate and inserting the module into the frame see the 7700FR manual.
Input BNC type (F type optional) connector for satellite IF or L-Band RF signals.
RF INPUT:
This signal can be an analog signal with frequency from 10MHz to 2.15GHz, with
any modulation format.
Four (DA4) or eight (DA8) BNC (F type optional) connectors with amplified outputs
RF OUTPUT:
for signal distribution. This signal can be an analog signal with frequency from
10MHz to 2.15GHz, with any modulation format.
The 7702/7703DA8-RF active splitters come with a

Figure 2-1: Rear Panels

Revision 1.3
7700 MultiFrame Manual
7702/7703DA4/8-RF Active Splitters
7702/7703DA4/8-RF - 3
For