Report Bypass Switch Mode; Report Battery Status; Set / Report Time Of Day Clock - evertz 8083XDS-AD Instruction Manual

8083XDS-AD Analog and SD-SDI XDS Encoder
Page 4-10

4.3.9 Report Bypass Switch Mode

This command returns a message that shows the status of the video
bypass relay and the caption keyer.
Command: ^AS<cr>
Example results:
REMOTE OVERRIDE
EXTERNAL BYPASS
LOCAL BYPASS ON

4.3.10 Report Battery Status

This command will return the status of the internal battery
Command: ^AY<cr>
Example results: Battery OK

4.3.11 Set / Report Time of Day Clock

This command will return the current time of day or will allow the internal
clock to be set. The unit will maintain the correct time even through power
outages.
Command: ^Ac<cr>
Example results:
Local time is 13:47:39, Time zone is 05:00, DST is ON, DSO is ON
Command: ^Ac<sp>U<cr>
Example results:
UTC is 19:47:39, Time zone is 05:00, DST is ON DSO is ON
Command:
^Ac<sp>hh:mm:ss<sp>hh:mm<sp>dst<sp>DSO=dso<cr>
hh:mm:ss Local time
hh:mm Time zone offset
dst OFF Daylight Saving Time not in effect (DST Bit Off)
ON Daylight Saving Time in effect (DST Bit On)
dso OFF Daylight Saving Time not observed in this region
(DSO Bit Off)
ON Daylight Saving Time observed in this region (DSO
Bit On)
Revision 1.0.2
indicates keyer is disabled but video will be
passed through the 8083XDS-AD
indicates the SDI bypass relay has been
activated by an external signal
indicates the SDI bypass relay has been
activated by the
selection.
8083XDS-AD menu
SERIAL PROTOCOL