Figure 2-5: Wiring Rs-422 Tributary Serial Port To Rs-422 Master - evertz 8083XDS-AD Instruction Manual

INSTALLATION
8083XDS-AD Analog and SD-SDI XDS Encoder
Serial I/O Port (A,B,C)
Male (pins)
Description
Shield
Frame Ground
Receive Common
Receive A
Receive B
Transmit B
Transmit A
Transmit Common
Frame Ground
not used

Figure 2-5: Wiring RS-422 Tributary Serial Port to RS-422 Master

The baud rate, word size and parity of the XDS encoder must be set up to
match your software configuration. The most common settings are 1200
Baud, 7 bits odd parity. The Engineering Setup menu BAUD RATE and
SERIAL WORD menu items are used to configure these parameters. (See
section 3.3.1)
Revision 1.0.2
Computer "Master" End
DB-9 DB-9
-------------------
1 -----------------1
6 -----------------6
2 -----------------2
7 -----------------7
3 -----------------3
8 -----------------8
4 -----------------4
9 -----------------9
5 -----------------5
Female
Description
Shield
Frame Ground
Transmit Comm.
Transmit A
Transmit B
Receive B
Receive A
Receive Common
Frame Ground
not used
Page 2-7