Figure 2-3: Typical Connections To The 8083Xds-Ad Xds Encoder; Figure 2-4: Wiring Rs-232 Dte Serial Port To Computer - evertz 8083XDS-AD Instruction Manual

8083XDS-AD Analog and SD-SDI XDS Encoder

Figure 2-3: Typical Connections to the 8083XDS-AD XDS Encoder

Page 2-6
Connect PORT A, B or C of the XDS Encoder to one of the serial ports
(typically COM1 or COM2) of your computer. Figure 2-4 below shows the
typical cable wiring diagram to connect Port A, B or C and a personal
computer. If none of the ports have been altered from the factory settings,
you can use a standard "NULL MODEM" cable to connect your PC to any
port. If you are connecting only one computer running XDS encoding
software, we recommend connecting it to port C.
Serial I/O Port (A,B,C)
Male (pins)
Description
Shield
RS 232 Transmit
Ground
RS 232 Receive
RS 232 CTS
RS 232 DTR
RS 232 RTS
RS 232 DSR

Figure 2-4: Wiring RS-232 DTE Serial Port to Computer

Revision 1.0.2
Computer End
Male (pins)
DB-9 DB-25 DB-9
-------------------
3 ----------------- 3
5 ----------------- 7
2 ----------------- 2
8 ----------------- 4
4 ----------------- 6
7 ----------------- 5
6 ---------------- 20
Description
Shield
2 RS 232 Receive
5 Signal Ground
3 RS 232 Transmit
7 RS 232 RTS
6 RS 232 DSR
8 RS 232 CTS
4 RS 232 DTR
INSTALLATION