Table of Contents
Advertisement
8083XDS-AD Analog and SD-SDI XDS Encoder
Page 1-6
EIA-744-A:
The EIA standard that defines the formatting of content
advisory information accommodating either U.S. or Canadian systems, as
well as the movie industry's MPAA rating system using the vertical blanking
interval. EIA 744-A redefines the XDS Program Rating (content advisory)
packet, 05h, currently contained in EIA-608-B, Current Class.
EIA-746-A:
This document is a proposed amendment to EIA-608-A to
insert Internet Uniform Resource. Locators (URLs) within the line-21 data
system using the Text-2 (T-2) service. These URLs may be used by
receiving devices in a variety of ways to associate Internet content with
related television broadcast content.
SMPTE (Society of Motion Picture and Television Engineers):
professional organization that recommends standards for the film and
television industries.
SMPTE 12M: The SMPTE standard for linear time code.
SMPTE 125M:
The SMPTE standard for bit parallel digital interface
for component video signals. SMPTE 125M defines the parameters
required to generate and distribute component video signals on a parallel
interface.
SMPTE 244M:
The SMPTE standard for bit parallel digital interface
for composite video signals.
required to generate and distribute composite video signals on a parallel
interface.
SMPTE 259M:
The SMPTE standard for 525 line serial digital
component and composite interfaces.
SMPTE 269M:
This SMPTE standard defines an opto-isolated fault
tally output signal for connecting to user-defined equipment such as
warning indicators.
SMPTE 291M: Defines the method of multiplexing ancillary data such as
audio and captions to 292M and 259M signals.
SMPTE 292M: Defines the serial interface that is used for carriage of
HDTV video signals. It and its standard definition equivalent 259M provide
a standard transport mechanism, not only for the video signal, but also for
digitized audio and data such as captions.
SMPTE 309M:
The SMPTE standard for encoding date information
into the user bits of linear time code.
SMPTE 333M:
The
captioning equipment with ATSC XDS encoders
Revision 1.0.2
SMPTE 244M defines the parameters
SMPTE
standard
for
A
serially
interfacing
OVERVIEW
Advertisement
Table of Contents
