Table of Contents
Advertisement
8083XDS-AD Analog and SD-SDI XDS Encoder
Page 4-24
4.7.3 Show Port Active Maps
This command will report the active map for each port.
controls what port has control of a data type.
Command:
^AO<cr>
Example result:
Active Map
PORT A: CF1
PORT B:
CF2
PORT C:
This example shows Port A is actively controlling the captions in field 1,
Port B is controlling the captions in field 2, and Port C is not actively
controlling any data.
4.7.4 Alter Port Active Maps
This command will alter the active map for any port by adding or
subtracting various data types.
forces other control ports to relinquish control of the specified data type.
Command:
^AO<sp>pn<sp>-dt...dt...dt<sp>ovr<cr>
Default:
none
Example:
^AO PB –CF1<cr>
^AO CF1<cr>
^AO CF1 O<cr>
Revision 1.0.2
(capital letter 'O')
The optional override parameter ('O')
This command will remove the
active indication for Port B from field
1 captions.
This command will indicate that the
current port is active in the captions
in field 1.
Activity for other data
types remain as previously set.
This command will force the current
port to be active in the captions in
field 1. Activity for other data types
remain as previously set.
other control port is active in CF1
will be reset.
The active map
If any
SERIAL PROTOCOL
Advertisement
Table of Contents
