Table of Contents
Advertisement
SERIAL PROTOCOL
8083XDS-AD Analog and SD-SDI XDS Encoder
dc
Data Channel
Note that there is only one XDS decoder mode so all 3 commands will
accomplish the same effect. Support for the XDSG and XDSF strings
added for compatibility with the EEG command set.
Examples:
^AM<sp>C1<cr>
Display Caption Channel 1
^AM<sp>VCHIP<cr>
Display V-CHIP rating
^AM<sp>XDS<cr>
Switches decoder to XDS display mode.
4.3.6 Report Firmware Version
The XDS encoder will respond with message identifying its firmware
version and port name.
Command:
^A?<cr>
Returns
Evertz 8084 Ver:CK88D5 U000427 -- Use ^AH{return} for
help
Port B
4.3.7
Command Help
This command returns a help message from the XDS encoder.
Command:
^AH<cr>
Default:
none
Returns:
Cmds supported - ^C,^F,...
^A
+0,1,2,3,4,5,6,7,8,9,A,B,c,,E,H,I,M,O,P,Q,r,t,u,S,Y,?
4.3.8 Set Stream Mode
This command will place the encoder in STREAM operating mode.
Command:
^Au<cr>
Revision 1.0.2
VCHIP
V-Chip Decoder
XDS
XDS Decoder
XDSG
XDS Decoder
XDSF
XDS Decoder
Page 4-9
Advertisement
Table of Contents
