evertz 8083XDS-AD Instruction Manual page 121

Toolbar
Icon Name
Set Clock
Sync MetaCast and
Encoder
Options
A.5.3. Setting the 8083XDS-AD Date from MetaCast 2
If your LTC input to the 8083XDS-AD contains date information you can go straight to section A.5.4,
otherwise you will have to set the date in the 8083XDS-AD from MetaCast 2. To do this you will need
to temporarily set the Time Source to PC Clock. Check the PC Clock's settings by clicking the 'Set
Time' button on the Clock page toolbar. The Date/Time Properties screen will appear.
APPLICATION NOTES
8083XDS-AD Analog and SD-SDI XDS Encoder
Open up the Date/Time Properties window so that you can edit
the Date, Time and Time Zone. If your clock source is the PC,
this button will open the standard dialog used to set the PC
clock.
If you are connected to a Caption Encoder, this button will
ensure that MetaCast 2 is synchronized with the 8083XDS-AD
Encoder. If your clock source is the Encoder, MetaCast 2 will
update its own clock; otherwise MetaCast 2 will update the
clock in the Encoder.
Shortcut to the General Options page when you can set various
clock parameters.
Revision 1.0.2
Description
AN-7