Table of Contents
Advertisement
8083XDS-AD Analog and SD-SDI XDS Encoder
The currently active menu setting will be flashing.
Page 3-2
When you have made all the desired changes, press the SETUP key to exit
the menu system and return to the normal display mode.
The display will automatically return to the normal display mode if no key
presses are made for several seconds. (See section 3.1.4)
The menu systems consist of a main menu with two or more choices for
each menu item. A ")" symbol is shown to the left of the main level Setup
menu items. A ">" symbol is shown to the left of the main level
Engineering menu items. This allows them to be easily distinguished from
each other and from the front panel operating messages. The sub-menu
choices are shown in lower case to allow them to be easily distinguished
from the main level items.
Figure 3-2 is an overview of the Setup menu system that shows all of the
menu items and where you will find the menu choices.
Figure 3-3 is an overview of the Engineering menu system that shows all of
the Engineering menu items and where you will find the menu choices. In
each figure, factory default choices for each menu item are shown in
boldface.
Each of the Setup menu items are described in section 3.2 with an
explanation of what each choice does. Each of the Engineering menu
items are described in section 3.3 with an explanation of what each choice
does.
Revision 1.0.2
OPERATION
Advertisement
Table of Contents
