Table of Contents
Advertisement
SERIAL PROTOCOL
8083XDS-AD Analog and SD-SDI XDS Encoder
4.7.5
Reset Port
This command will reset a port. This command immediately clears the input
and output data queues and resets the 8083XDS-AD to the Transparent
State in Field 1 and Field 2. Article and XDS output queues are not reset
by this command. They must be explicitly reset by using the queue articles
and queue XDS commands. (See sections 4.5.4 and 4.6.3.)
other control ports may be simultaneously sending data, this command
only affects the fields and data types that have not been appropriated by
other control ports.
Command:
^Ar<sp>pn<cr>
Example:
^Ar PB<cr>
Revision 1.0.2
Resets Port B
Because
Page 4-25
Advertisement
Table of Contents
