7700 MultiFrame Manual
7700DA4-SLKE(-HD) HD/SD-SDI StreamLINK® MPEG-2/H.264 Encoder over IP
CONFIGURATION
4.3.
4.3.1. Configuration Buttons
The following configuration buttons will enable the user to change the encoder setup, set the encoder to
the default settings, reset the encoder, or start and stop the encoder.
Figure 4-4: Configuration Buttons
4.3.2. Configuration Setup
Selecting the "Configure" button (see Figure 4-4) will launch a SLKE Encoder Setup screen, as shown in
Figure 4-5. The SLKE Encoder Setup screen enables the user to adjust the settings of the encoder.
Figure 4-5: SLKE Encoder Setup
Page - 10
Revision 1.2