Figure 21: Upper Bracket Installation; Figure 22: Upper Brackets And Offset Location - Mellanox Technologies MSX6536-10R Hardware Installation Manual

Step 14. Slide the chassis out just far enough to install the upper brackets. See Figure 21.
Step 15. Screw the upper brackets onto the vertical supports and tighten in place. See
Figure 22. You will need the socket wrench with both extensions to tighten these bolts.
Step 16. Slide the chassis onto the shelf until the face plate of the chassis touches the vertical
rack support.
Step 17. Make sure the upper brackets are installed in their correct location.
Step 18. Screw the 14 bolts through the faceplate into the caged nuts, DO NOT TIGHTEN.
28

Figure 21: Upper Bracket Installation

Figure 22: Upper Brackets and Offset Location

117 cm from the shelf to this
hole.
Use the socket wrench with
both extensions to tighten
these bolts.
Mellanox Technologies
Installation