Figure 19: Positioning The Insert In Front Of The Right Bracket; Figure 20: Assembling The Rail Bracket; Figure 21: Right Rail Assembly (Top) And Left Rail Assembly (Bottom) - Mellanox Technologies Grid Director 4700 Installation Manual


The rail supports six or eight 8-32 5/8" screws. Eight is recommended.

Figure 19: Positioning the Insert in Front of the Right Bracket

Figure 20: Assembling the Rail Bracket

2. Select the round holes in the bracket.
3. Assemble the rail with flat washers, spring washers, and nuts.
4. Do not tighten the screws at this time.

Figure 21: Right Rail Assembly (top) and Left Rail Assembly (bottom)

58
Rack-Mounting the 4700 Chassis