Manual Detect; Detect Report - Dahua 41HS-W-S2 Series User Manual

There are two detect types:

Quick detect is to detect via the universal system files. System can quickly complete the HDD
scan. If you want to use this function, please make sure the HDD is in use now. If the HDD is
removed from other device, please make sure the write-data once was full after it installed on
current device.

Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD
that is recording.

4.15.4.1 Manual Detect

From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown as below. See
Figure 4-154.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect
information.

4.15.4.2 Detect Report

After the detect operation, you can go to the detect report to view corresponding information.
From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown as below. See
Figure 4-155.
Figure 4-154
279