Alarm Connection; Alarm Port - Dahua DHI-NVR5208-4KS2 User Manual

Icon
HDMI
VGA
WPS/RESET

2.3 Alarm Connection

2.3.1 Alarm Port

The alarm port is shown as below. See Figure 2-69. The following figure for reference only.
Figure 2-68
Table 2-31
Name Function
Power input
Power socket. Input DC12V/2A.
socket.
10M/100Mbps self-adaptive Ethernet port. Connect to
Network port
the network cable.
USB2.0 port. Connect to mouse, USB storage device,
USB2.0 port
and etc.
High definition audio and video signal output port. It
High Definition transmits uncompressed high definition video and
Media Interface multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
VGA video output VGA video output port. Output analog video signal. It
port can connect to the monitor to view analog video.
GND Ground end
Device Wi-Fi reset and WPS function button:

Reset/WPS
function

Hold down this button for 5 seconds and above to
restore Wi-Fi AP to defaults.
Press this button for less than 2 seconds, and
then press the WPS button of Wi-Fi IPC, the
device and Wi-Fi IPC can be connected.
Front Panel and Rear Panel 48