Table of Contents
Advertisement
5.10.5.3 Video Tampering
When the camera lens is covered, or the video is displayed in a single color because of sunlight
status, the monitoring cannot be continued normally. To avoid such situations, you can configure
the tampering alarm settings.
Step 1
Select Main Menu > ALARM > Video Detection > Video Tampering.
Step 2
Select a channel and then click
Step 3
Click Setting next to Schedule to configure the alarm schedule.
Step 4
Configure alarm linkage. For details, see Table 5-43.
Step 5
Click Apply.
5.10.5.4 Scene Change
When the detected scene has changed, system performs alarm linkage actions.
Select Main Menu > ALARM > Video Detection > Scene Changing.
Step 1
Figure 5-173 Video tampering
to enable the function.
261
User's Manual
Advertisement
Table of Contents
