People Counting (Optional) - Dahua DHI-NVR5224-24P-4KS2 User Manual

4.7.5 People Counting (Optional)

System adopts video image and graphics analysis technology. System can calculate the entry/exit people
amount in the specified zone on the video. It can generate an alarm when the amount has exceeded the
threshold.
From main menu->Setting->Event->People counting, you can see an interface shown as in Figure 4-141.

Enable: Check the box to enable people counting function.

OSD overlay: Check the box here; you can view the people amount on the surveillance video.

Rule setup: Click Set button, you can set people counting zone, name, and direction (entry/exit).

Entry No.: It is to set people entry amount. System can generate an alarm once the amount has
exceeded the threshold.

Exit No.: It is to set people exit amount. System can generate an alarm once the amount has
exceeded the threshold.

Remaining No.: It is to set people staying amount in the zone. System can generate an alarm once
the amount has exceeded the threshold.
You can refer to the chapter 4.7.1.1 motion detect to set other parameters.
Click OK to complete the setup.
Figure 4-140
252