The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click
4.4.4.4 Calling AutoScan
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the border that
you want to call.
Step 2 Click
The PTZ camera performs scanning according to the configured borders.
Step 3 Click
4.4.4.5 Calling AutoPan
Step 1 On the Expanded PTZ Control Panel, click
Step 2 Click
4.4.4.6 Using AUX Button
On the Expanded PTZ Control Panel, click
Figure 4-91.
In the Direct Aux list, select the option that corresponds to the applied protocol.
In the Aux Num box, enter the number that corresponds to the AUX switch on the decoder.
4.5 Record File
Device adopts 24-hour continuous record by default. It supports customized record period and
record type. Refer to "4.1.4.6 Schedule" for detailed information.
4.6 Playback and Search
4.6.1 Instant Playback
You can view the record file of previous 5 to 60 minutes. Refer to "4.3.2 Navigation bar" for
instant playback information.
4.6.2 Search Interface
You can search and playback the record fine on the NVR.
again to stop calling the pattern.
.
again to stop auto scanning.
again to stop moving.
Figure 4-91
to start moving in horizontal direction.
, the AUX setting interface is displayed. See
Local Basic Operation 151