Maintenance And Troubleshooting - Micromeritics ACCUPYC III Operator's Manual

3 M
AINTENANCE AND
Parts and accessories are located on the
Improper handling, disposing of, or transporting potentially hazardous materials can
cause serious bodily harm or damage to the instrument. Always refer to the SDS when
handling hazardous materials. Safe operation and handling of the instrument,
supplies, and accessories are the responsibility of the operator.
Do not modify this instrument without the authorization of Micromeritics Service Per-
sonnel.
When lifting or relocating the instrument, use proper lifting and transporting devices for
heavy instruments. Ensure that sufficient personnel are available to assist in moving
the instrument. The AccuPyc 1350 weighs approximately 11.5 kg (25.3 lb).
Use of a power cord or power supply not provided with the instrument could cause
personal injury or damage to the equipment. If a replacement is needed, contact your
Micromeritics Service Representative. Detachable power supply cords with an
inadequate rating could cause significant instrument damage or physical harm.
Do not add anything between the power cord and the power source that would
compromise the earth ground.
Do not remove or disable the grounding prong on the instrument power cord.
The analyzer has been designed to provide efficient and continuous service; however, certain
maintenance procedures should be followed to obtain the best results over the longest period of
time. When unexpected results occur, some common operational problems not indicated on the
window and their respective causes and solutions are provided. Refer to
page C - 1.
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023
T
ROUBLESHOOTING
Micromeritics web page.

3 Maintenance and Troubleshooting

Error Messages on
3 - 51