Communications - Micromeritics ACCUPYC III Operator's Manual

C
OMMUNICATIONS
Settings > Communications
Use to set up communication defaults.
TCP/IP
Settings > Communications > TCP/IP
TCP/IP
Fields
LAB NET
MIC NET
MIC NET Subnet
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023
Description
Displays the IP address (if available) on the lab network when the
instrument is connected with an Ethernet cable. The lab network's
DHCP server assigns an IP address automatically. It is only shown if
the instrument is connected over DHCP. To operate the instrument
remotely, enter this address in a web browser on another computer
connected to the same network.
Displays the IP address on the Micromeritics network. The
instruments coordinate their IP addresses on this network internally.
This is a local network that allows 1350s and legacy instruments to
share data when they are directly connected to each other with
Ethernet cables.
Displays the subnet IP address the MIC NET uses when it sets IP
addresses. The subnet choice must not conflict with the LAB NET or

Communications

2 - 41