Micromeritics ACCUPYC III Operator's Manual page 16

1 About the AccuPyc III
B C
ACK OMPONENTS
Back Components
Component
Analysis
A
Gas Port
Vacuum
B
Port
Vent Port
C
Dry Air Port
D
LAB NET
E
Port
MIC NET
F
Port
Power
G
Connector
USB Ports
H
Dust Filters
I
1 - 4
Description
Connects the analysis gas. Helium is recommended.
Allows connection of an optional vacuum pump for sample pre-
paration.
The exhaust port for the analysis gas.
Attaches a dry air or nitrogen source for preventing condensation
inside the instrument at low analysis temperatures.
Allows connection to a network for remote operation and data storage.
Allows sharing of records, methods and inserts among instruments.
Connects the power source to the instrument.
Connects a keyboard or other USB peripheral including mouse, bar-
code reader, USB data storage device, or Wi-Fi module.
There are two dust filters located on the back of the AccuPyc III. These
should be checked regularly to make sure they are clean. To clean the
dust filter, remove the filter from the tray and use a method that is
appropriate in your laboratory.
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023