Micromeritics ACCUPYC III Operator's Manual page 62

2 About the Software
Fields
Name
Share on MIC NET
Volume
Temperature
Material
M I
ULTIVOLUME NSERT
The names and volumes of sample chamber inserts to be used to reduce empty volume when
analyzing small samples.
2 - 32
Description
Enter the name of the Multivolume Insert, Volume Standard or Cup.
This name must be unique.
Enable to share inserts between instruments connected together
through the MIC NET. The instrument with the insert having the
latest modification will be shared. Does not apply for Volume Stand-
ard.
Enter the volume of the Multivolume Insert, Volume Standard or Cup.
If the cup or multivolume insert has already been measured, this field
cannot be edited.
Enter the temperature at which the Multivolume Insert, Volume
Standard or Cup volume was measured. If the Cup or Multivolume
Insert has already been measured, this field cannot be edited.
Select the applicable type of material (such as Aluminum, Stainless
Steel, or Tungsten Carbide). When a material is selected, the
Thermal Expansion field is not displayed.
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023