Micromeritics ACCUPYC III Operator's Manual page 25

I R
NSTALL AND EMOVE
Open the chamber cap and place the insert into the sample chamber. The insert should fit snugly
in the chamber. Place the appropriate sample cup into the well of the insert. The 0.1 cm
can be treated as a cup for the 1.0 cm
Do not force the insert or cup into the openings. This may damage the instrument,
insert, or sample cup.
Install the fritted filter cap (if used) before closing the sample chamber. A fritted filter cap is used to
constrict gas flow and is included with some inserts. The fritted filter cap for the 10 cm
on the top of the sample cup. The fritted filter caps for the 1 and 3.5 cm
insert. Refer to Inserts on page 2 - 31
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023
I S
NSERTS AND AMPLE
3
insert.
and Insert on page 2 - 22
Multivolume Insert Option
C
UPS
3
3
inserts fit on the top of the
3
insert
insert fits
1 - 13