Configuration Options - Micromeritics ACCUPYC III Operator's Manual

1 About the AccuPyc III
C
ONFIGURATION
For best fit with a sample, the AccuPyc III is available in multiple configurations. "Best fit" means
the sample nearly fills the sample chamber and, therefore, optimizes the precision of the results.
All sample chamber volumes are nominal.
3
10 cm sample chamber
n
3
n 100 cm sample chamber
T C
EMPERATURE
Each chamber size is available with Temperature Stabilization (TS) or Advanced Temperature
Control (ATC). Both configurations provide active temperature control for stability.
TS units operate at 20 °C.
n
ATC units can be set from 4 °C to 60 °C.
n
For ATC units, Method allows for selection of the analysis temperature. Refer to
Method on page 2 -
1 - 14
O
PTIONS
O
ONTROLLED PTIONS
21.
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023