Table of Contents
Advertisement
1 About the AccuPyc III
To attach the ATC assembly to the instrument:
1. Connect the female fitting to the Dry Air port on the back of the instrument.
2. Connect one end of a flexible tubing to the top barbed male connector on the rotameter
assembly and the other end to the barbed male connector connected to the Dry Air port on
the back of the instrument.
3. Connect one end of a flexible tubing to the bottom barbed male connector on the rotameter
and the other end to the gas supply. Use the adjustment knob to adjust the flow of gas.
1 - 8
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023
Advertisement
Table of Contents
Need help?
Do you have a question about the ACCUPYC III and is the answer not in the manual?