Peripheral Devices - Micromeritics ACCUPYC III Operator's Manual

1 About the AccuPyc III
P D
ERIPHERAL EVICES
K
EYBOARD
A USB keyboard can be attached to the AccuPyc III for completing entry fields. If a keyboard is
connected while the software is running, it is available for immediate use. This item is optional and
must be provided by the customer.
M
OUSE
A USB mouse can be attached to the AccuPyc III. If the mouse is plugged in while the software is
running, a restart is required in order to see the mouse cursor. If the mouse is unplugged while the
software is running, the cursor still displays on screen. This item is optional and must be provided
by the customer.
B S
ARCODE CANNER
A USB barcode scanner can be attached to the AccuPyc III. While the information scanned
(typically a sample identification code) can be inserted into any field, it is commonly added to the
Description field when performing an analysis. This item is optional and must be provided by the
customer.
W -F
I I
Wi-Fi is provided via a dongle that is inserted into a USB port on the AccuPyc III instrument.
S
ET UP
1. Insert the dongle into the applicable port.
2. On the touchscreen, tap
3. In the Wi-Fi field, tap and select a Wi-Fi network. If a Wi-Fi network is not shown, or a
connection cannot be made, refer to
4. Enter the Wi-Fi password.
5. Tap Save.
1 - 10
Settings > Communications
Error Messages on page C - 1
and select TCP/IP.
for resolution actions.
AccuPyc III Operator Manual
135-42800-01 (Rev -) — Nov 2023