Agilent Technologies E4418B User Manual page 165

-121
Invalid character in number
An invalid character was found in the number specified for a parameter value.
For example, SENS:AVER:COUN 128#H.
-123
Exponent too large
A numeric parameter was found whose exponent was larger than 32,000.
For example, SENS:COUN 1E34000.
-124
Too many digits
A numeric parameter was found whose mantissa contained more than 255 digits,
excluding leading zeros.
-128
Numeric data not allowed
A numeric value was received within a command which does not accept a numeric
value.
For example, MEM:CLE 24.
-131
Invalid suffix
A suffix was incorrectly specified for a numeric parameter. You may have
misspelled the suffix.
For example, SENS:FREQ 200KZ.
-134
Suffix too long
A suffix used contained more than 12 characters.
For example, SENS:FREQ 2MHZZZZZZZZZZZ.
-138
Suffix not allowed
A suffix was received following a numeric parameter which does not accept a
suffix.
For example, INIT:CONT 0Hz.
-148
Character data not allowed
A discrete parameter was received but a character string or a numeric parameter
was expected. Check the list of parameters to verify that you have used a valid
parameter type.
For example, MEM:CLE CUSTOM_1.
-151
Invalid string data
An invalid string was received. Check to see if you have enclosed the character
string in single or double quotes.
For example, MEM:CLE "CUSTOM_1.
Agilent E4418B User's Guide
Error Messages
Error Messages
4-5