Introduction - Agilent Technologies E4418B User Manual

Specifications

Introduction

Introduction
This chapter details the power meter's specifications and supplemental
characteristics.
Specifications describe the warranted performance and apply after a 30 minute
warm-up. These specifications are valid over the power meter's operating and
environmental range unless otherwise stated and after performing a zero and
calibration.
Supplemental characteristics, which are shown in italics, are intended to provide
information useful in applying the power meter by giving typical, but nonwarranted
performance parameters. These characteristics are shown in italics or denoted as
"typical", "nominal" or "approximate".
For information on measurement uncertainty calculations, refer to Agilent
Application Note 64-1A, "Fundamentals of RF and Microwave Power
Measurements", Literature Number 5965-6630.
5-2 Agilent E4418B User's Guide