Agilent Technologies E4418B User Manual page 148

Menu Reference
Front Panel Menu Reference "System/Inputs" Menu
Next
n
Press this softkey to move to the next error in the error queue. The
displayed error message is individually cleared each time
selected.
Done
n
Press this softkey to return to the "System/Inputs" menu.
•
Recorder Output
Press this softkey to access a menu which allows you to modify the setup of
the recorder output. Refer to "Recorder Output", on page 2-58 for further
information.
Output Off On
n
Press this softkey to switch the rear panel Recorder Output on or off.
The Recorder Output produces a dc voltage that corresponds to the
selected input channel power level in Watts.
Max Power
n
Press this softkey to enter the input power level that you want to
represent the 1 V
Min Power
n
Press this softkey to enter the input power level that you want to
represent the 0 V
•
Service
Press this softkey to access a menu which allows you to test and service your
power meter.
Self Test
n
Press this softkey to access the power meter's self test menu.
u Instrument Self Test
Press this softkey to run a series of tests on the power meter. Refer to
"Instrument Self Test", on page 2-67 for further information on the
tests run.
Confidence Check
u
Press this softkey to verify that the power meter makes an accurate
measurement of it's 1 mW POWER REF output.
Individual
u
Press this softkey to access a menu which allows you to select
individual self tests to be run.
3-26
maximum output voltage of the Recorder Output.
dc
minimum output voltage of the Recorder Output.
dc
is
Next
Agilent E4418B User's Guide