Agilent Technologies E4418B User Manual page 58

Power Meter Operation
Making Measurements with the Agilent E-Series Power Sensors
Example
To make a measurement using an Agilent E-series power sensor. The frequency of the
signal to be measured is 100 MHz.
• Disconnect the power sensor from any source.
Zero
• Press .
Cal
• Press .
Zero
• Connect the power sensor to the POWER REF output.
• Press .
Cal
Frequency
• Press
Cal Fac
to enter 100. Press
• Connect the power sensor to the signal to be measured.
• The measurement result is now displayed.
2-16
, . Use the ,
Freq
.
MHz
, and hardkeys
Agilent E4418B User's Guide