Agilent Technologies E4418B User Manual page 146

Menu Reference
Front Panel Menu Reference "System/Inputs" Menu
applied to the measured power before the result is displayed.
Offset Off On
entered using
page 2-36 for further information.
(Agilent E-series power sensors only)
Range
n
Press this softkey to set the range in which you require the power meter
to make the power measurement or set the power meter to autoranging.
Choose either "UPPER", "LOWER" or "AUTO" from the selection
available using the
Refer to "Setting the Range", on page 2-51 for further information.
Limits
n
Press this softkey to access a menu which allows you to enter the upper
and lower measurement limits. Refer to "Setting Measurement Limits",
on page 2-42 for further information.
Limits Off On
u
Press this softkey to toggle between the test limits being on or off. The
default is "Off".
Max
u
Press this softkey to enter the upper measurement limit in the range
-150 dBm to 230 dBm. The default value is 90.00 dBm. Use the
,
choice press the appropriate measurement units.
than
Min
Min
u
Press this softkey to enter the lower measurement limit in the range
-150 dBm to 230 dBm. The default value is -90.00 dBm. Use the
,
confirm your choice press the appropriate measurement units.
must be less than
n
Duty Cycle Off On
Press this softkey to toggle the duty cycle value on or off. The default is
"Off". The duty cycle value is set using
Duty Cycle
n
Press this softkey to set the duty cycle for the pulse power measurement
feature of the power meter. A value in the range of 0.001% to 100% can
be entered. The default value is 1.000%. Use the
hardkeys to change the value. To confirm your choice press
Duty Cycle Off On
entered using
page 2-40 for further information.
3-24
is automatically set to "On" when a value is
. Refer to "Setting Channel Offsets", on
Offset
and hardkeys. The default is "AUTO".
and hardkeys to change the value. To confirm your
.
, and hardkeys to change the value. To
.
Max
is automatically set to "On" when a value is
. Refer to "Measuring Pulsed Signals", on
Duty Cycle
must be greater
Max
Min
.
Duty Cycle
, ,
Agilent E4418B User's Guide
,
and
.
%