Agilent Technologies E4418B User Manual page 144

Menu Reference
Front Panel Menu Reference "System/Inputs" Menu
Press this softkey to access a menu and screen which allows you to
modify, add and remove frequency, calibration factors and offsets
from the currently selected table and modify the table name. Use the
,
frequency, calibration factors and offsets. Press
or
Delete
Change
v
Press this softkey to modify the highlighted parameter, which is
either a frequency, calibration factor, offset or table name. A pop up
window displays the parameter. Use the
hardkeys to change the parameter value. To confirm your
choice press
Insert
v
Press this softkey to insert a new table entry. You are prompted to
enter the frequency and calibration factor or offset. The entry is
inserted in ascending frequency order.
Delete
v
Press this softkey to delete a table entry. If you delete the frequency
the corresponding calibration factor or offset is also removed and
vice versa.
Done
v
Press this softkey to return to the measurement screen. The softkeys
from the first level of the "System/Inputs" menu are displayed.
Freq Dep Offset
n
Press this softkey to access a menu and screen which allows you to
select and edit frequency dependent offset tables. Use the
hardkeys to scroll through the displayed frequency dependent
offset tables.
Edit Table
u
Press this softkey to access a menu and screen which allows you to
modify, add and remove frequency, calibration factors and offsets
from the currently selected table and modify the table name. Use the
,
frequency, calibration factors and offsets. Press
or
Delete
Change
v
Press this softkey to modify the highlighted parameter, which is
either a frequency, calibration factor, offset or table name. A pop up
window displays the parameter. Use the
3-22
, and hardkeys to move between the name,
as follows:
.
Enter
, and hardkeys to move between the name,
as follows:
,
Change Insert
, , and
and
,
Change Insert
, , and
Agilent E4418B User's Guide