Agilent Technologies E4418B User Manual page 65

Note
Note
Agilent E4418B User's Guide
No spaces are allowed in the name.
n
2. To edit the parameter you currently have selected press
power meter displays the data in a pop up window. Modify this data (see
below) as desired.
Use or
n
currently positioned.
Use or
n
3. To confirm your choice press the appropriate softkey.
4. To add a new sensor calibration table entry press
prompted for the frequency and calibration factor. The entry is sorted by
frequency.
5. To remove a sensor calibration table entry use the
hardkeys to select the entry, press
frequency the equivalent calibration factor is also removed and vice versa.
You can only edit the table name you cannot delete it.
6. When you have completed editing the sensor calibration table press
to return to the "Sensor Tbles" screen.
Ensure that the frequency points you use cover the frequency range of the
signals you want to measure. If you measure a signal with a frequency
outside the frequency range defined in the sensor calibration table, the power
meter uses the highest or lowest frequency point in the sensor calibration
table to calculate the calibration factor.
Making Measurements using Sensor Calibration Tables
to modify the character on which the cursor is
to move to other characters.
Delete
Power Meter Operation
. The
Change
. You are
Insert
, , and
. If you delete the
Done
2-23