Show L2Tp Lns; Show L2Tpeth; Show Location; Show Log - Digi IX20 User Manual

Command line interface
Parameters
name: Display more details for a specific L2TP access concentrator.

show l2tp lns

Show L2TP network server status & statistics.
Syntax
show l2tp lns [name STRING]
Parameters
name: Display more details for a specific L2TP network server.

show l2tpeth

Show L2TPv3 ethernet tunnel session status and statistics.
Syntax
show l2tpeth [name STRING]
Parameters
name: Display more details for a specific L2TPv3 ethernet tunnel session.

show location

Show location information.
Syntax
show location [geofence]
Parameters
geofence: Show geofence information.

show log

Show system log (low level).
Syntax
show log [number INTEGER] [filter <critical|warning|debug|info>]
Parameters
number: Number of lines to retrieve from log. (Minimum: 1, Default: 20)
filter: Filters for type of log message displayed (critical, warning, info, debug). Note, filters from the
number of messages retrieved not the whole log (this can be very time consuming). If you require
more messages of the filtered type, increase the number of messages retrieved using 'number'.

show manufacture

IX20 User Guide
Command line reference
1174