Digi IX20 User Manual page 1063

Monitoring

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > NetFlow probe.
4. Enable NetFlow probe.
5. Protocol version: Select the Protocol version. Available options are:
n NetFlow v5—Supports IPv4 only.
n NetFlow v9—Supports IPv4 and IPv6.
n NetFlow v10 (IPFIX)— Supports both IPv4 and IPv6 and includes IP Flow Information
Export (IPFIX).
IX20 User Guide
Use Digi Remote Manager to view and manage your
Configure NetFlow Probe
1063