Digi IX20 User Manual page 1148

Command line interface
n At the config prompt:
a. Enter service to move to the service node:
b. Enter ssh to move to the ssh node:
c. Enter ? to display help for the ssh node:
Either of these methods will display the following information:
(config)> service ssh ?
SSH: An SSH server for managing the device.
Parameters
------------------------------------------------------------------------
--
enable
key
port
Additional Configuration
------------------------------------------------------------------------
--
acl
mdns
(config)> service ssh
4. Lastly, to display allowed values and other information for the enable parameter, use one of
the following methods:
n At the config prompt, enter service ssh enable ?:
(config)> service ssh enable ?
n At the config prompt:
a. Enter service to move to the service node:
b. Enter ssh to move to the ssh node:
IX20 User Guide
(config)> service
(config service)>
(config service)> ssh
(config service ssh)>
(config service ssh)> ?
Current Value
true
[private]
22
Access control list
(config)> service
(config service)>
(config service)> ssh
(config service ssh)>
Configuration mode
Enable
Private key
Port
1148