Digi IX20 User Manual page 509

Virtual Private Networks (VPN)
b. Use the ? to determine available options:
(config)> vpn ipsec advanced ?
Advanced: Advanced configuration that applies to all IPsec tunnels.
Parameters
---------------------------------------------------------------------
---------
debug
ike_fragment_size
ike_retransmit_tries
keep_alive
Additional Configuration
---------------------------------------------------------------------
----------
connection_retry_timeout
connection_try_interval
ike_timeout
(config)>
Generally, the default settings for these should be sufficient.
c. You can also enable debugging for IPsec:
(config)> vpn ipsec advanced debug value
(config)>
where value is one of:
n
n
n
n
n
n
20. Save the configuration and apply the change
(config)> save
Configuration saved.
>
21. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX20 User Guide
none
basic_auditing
detailed_control
generic_control
raw_data
sensitive_data
Current Value
none Debug level
1280 Maximum IKE fragment size
5 IKE retransmit tries
40s NAT keep alive time
Connection retry timeout
Connection try interval
IKE timeout
IPsec
509