System Script Start; System Script Stop; System Serial Restart; System Serial Save - Digi IX20 User Manual

Command line interface
passphrase: Decrypt the archive with a passphrase.

system script start

Run a manual script. Scripts that are disabled, not a manual script, or already running can not be run.
Syntax
system script start <script>
Parameters
script: Script to start.

system script stop

Stop an active running script. Scripts scheduled to run again will still run again (disable a script to
prevent it from running again).
Syntax
system script stop <script>
Parameters
script: Script to stop.

system serial restart

Delete and restart the serial log.
Syntax
system serial restart <port>
Parameters
port: Serial port.

system serial save

Saves the current serial log to a file.
Syntax
system serial save <port> <path>
Parameters
port: Serial port.
path: The path and filename to save captured traffic to. If a relative path is provided, /etc/config/serial
will be used as the root directory for the path and file.

system serial show

Displays the serial log on the screen.
IX20 User Guide
Command line reference
1185