Command line interface
n
Method two: Create a user by moving through the configuration:
a. At the config prompt, enter auth to move to the auth node:
b. Enter user to move to the user node:
c. Create a new user with the username user1:
4. Configure a password for the user:
(config auth user user1)> password pwd1
(config auth user user1)>
5. List available authentication groups:
(config auth user user1)> show .. .. group
admin
acl
admin
nagios
openvpn
portal
serial
shell
serial
acl
admin
nagios
openvpn
IX20 User Guide
(config)> auth
(config auth)>
(config auth)> user
(config auth user)>
(config auth user)> add user1
(config auth user user1)>
enable true
enable false
enable false
no tunnels
enable false
no portals
enable false
no ports
enable false
enable true
enable false
enable false
no tunnels
Configuration mode
1155