Use The Scp Command - Digi IX20 User Manual

Command line interface
Command Description
remote host.
See
show Displays information about the device and the device's configuration.
See
about the show command.
speedtest
Perform a speed test.
ssh
SSH login to a remote server.
system
Issues commands related to system functionality.
tail
Tail a file.
telnet
Telnet login to a remote server.
traceroute
Sends and tracks route packets to a destination host.
Note For commands that operate on the IX20's file system, such as the cp, ls, and mkdir commands,
see File system for information about the file system, including how to copy, move and delete files
and directories.

Use the scp command

The scp command uses Secure Copy Protocol (SCP) to transfer files between the IX20 device and a
remote host.
Required configuration items
The hostname or IP address of the remote host.
n
The username and password of the user on the remote host.
n
Whether the file is being copied to the IX20 device from a remote host, or to the remote host
n
from the IX20 device.
If the file is being copied to the IX20 device from a remote host:
l
The path and filename of the file on the remote host that will be copied to the IX20
o
device.
The location on the IX20 device where the file will be copied.
o
If the file is being copied to a remote host from the IX20 device:
l
The path and filename of the file on the IX20 device that will be copied to the remote
o
host.
o The location on the remote host where the file will be copied.
Copy a file from a remote host to the IX20 device
To copy a file from a remote host to the IX20 device, use the
IX20 User Guide
Use the scp command for information about using the scp command.
Display status and statistics using the show command
Use the scp command
for more information
scp command as follows:
1139