Digi IX20 User Manual page 1054

Monitoring
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > intelliFlow.
4. Click to expand Ports.
5. At the bottom of the list of ports, click  to add a port.
6. Label is optional.
7. For Port number, type 9000.
8. For Service name, type MyService.
9. Click  to add a another port.
10. For Port number, type 9001.
11. For Service name, type MyService.
12. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX20 User Guide
intelliFlow
1054