Digi IX20 User Manual page 1007

System administration
3. For Version:, select the appropriate version of the device firmware.
4. Click Update Firmware.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. >Use the system firmware ota check command to determine if new modem firmware is
available on the Digi firmware repository.
> system firmware ota check
Current firmware version is 23.6.1.105
Checking for latest IX20 firmware...
Newest firmware version available to download is '23.9.74.0'
Device firmware update from '23.6.1.105' to '23.9.74.0' is needed
>
3. Use the modem firmware ota list command to list available firmware on the Digi firmware
repository.
> system firmware ota list
23.6.1.105
23.9.74.0
>
4. Perform an OTA firmware update:
n To perform an OTA firmware update by using the most recent available firmware from
the Digi firmware repository:
a. Update the firmware:
IX20 User Guide
> system firmware ota update
Downloading firmware version '23.9.74.0'...
Downloaded firmware /tmp/cli_firmware.bin remaining
Applying firmware version '23.9.74.0'...
41388K
netflash: got "/tmp/cli_firmware.bin", length=42381373
netflash: authentication successful
netflash: vendor and product names are verified.
netflash: programming FLASH device /dev/flash/image1
41408K 100%
Update system firmware
1007