Table of Contents
Advertisement
Network Disconnected The device is offline.
IP Address Conflicted
Illegal Login
3. Refer to Linkage Method Settings for setting linkage method.
4. Click Save.
8.1.4 Set Alarm Input
Alarm signal from the external device triggers the corresponding actions of the current device.
Before You Start
Make sure the external alarm device is connected. See Quick Start Guide for cable connection.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Input .
2. Check Enable Alarm Input Handling.
3. Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
5. Click Copy to... to copy the settings to other alarm input channels.
6. Click Save.
8.2 Smart Event (PTZ Channel)
This part introduces the smart event configuration in PTZ channel (Camera 01).
Note
You need to enable the smart event function of PTZ channel on VCA Resource page first to show
●
the function configuration page.
The function varies according to different models.
●
8.2.1 Set Intrusion Detection
Intrusion detection detects the object movement of entering and loitering in a predefined area.
When intrusion occurs, the device takes linkage actions as response.
Steps
1. Go to VCA → Smart Event → Intrusion Detection .
2. Check Enable.
Stitched PanoVu Camera with PTZ User Manual
The IP address of current device is same as that of other device in
the network.
Incorrect user name or password is entered.
60
Advertisement
Table of Contents
