Table of Contents
Advertisement
3. Click
to disable this function.
5.1.9 Count Pixel
It helps to get the height and width pixel of the selected region in the live view image.
Steps
1. Click
to enable the function.
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the bottom of the live view image.
5.1.10 Light
Click
to turn on or turn off the illuminator.
5.1.11 Operate Wiper
For the device that has a wiper, you can control the wiper via web browser.
Note
Wiper operation and settings vary on device models.
Steps
1. Go to Configuration → PTZ → Wiper .
2. Select a wiper mode.
One
The wiper wipes one time when you click
Time
Cycle
The wiper works on schedule at set wiping interval. Click
wiping.
Duration
The schedule in which the wiper is ready to work.
Interval
The interval between two successive wiping actions.
Auto
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.
Network Speed Dome User Manual
Note
on live view page.
38
on live view to start
Advertisement
Table of Contents
