Table of Contents
Advertisement
3.1.5 Light
Click
to turn on or turn off the illuminator.
3.1.6 Count Pixel
It helps to get the height and width pixel of the selected region in the live view image.
Steps
1. Click
to enable the function.
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the bottom of the live view image.
3.1.7 Start Digital Zoom
It helps to see a detailed information of any region in the image.
Steps
1. Click
to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to back to the original image.
3.1.8 Auxiliary Focus
It is used for motorized device. It can improve the image if the device cannot focus clearly.
For the device that supports ABF, adjust the lens angle, then focus and click ABF button on the
device. The device can focus clearly.
Click
to focus automatically.
Note
If the device cannot focus with auxiliary focus, you can use Lens Initialization , then use auxiliary
●
focus again to make the image clear.
If auxiliary focus cannot help the device focus clearly, you can use manual focus.
●
3.1.9 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Click
to operate lens initialization.
Network Camera User Manual
7
Advertisement
Table of Contents
