Table of Contents
Advertisement
10.2.2 Winding Resistance Settings
Figure 53 shows the winding resistance main settings.
To select the H-Side current that injects into the primary winding side
To select the X-Side current that injects into the non-primary winding side
By tapping on the plus button, you can add a user-defined test current to the list of the test
currents
INFO:
Do not select currents more than 10% of the test object nominal
current for each side. Otherwise, current will increase the temperature
and hence resistance of the winding.
90297-0.24 Instruction Manual mini-ATOS
Figure 53: Winding resistance main settings
Preliminary
Page 71 of 125
Advertisement
Table of Contents
Need help?
Do you have a question about the mini-ATOS and is the answer not in the manual?
Questions and answers