A Warranty Conditions; Limitation Of Warranty - Raytech mini-ATOS Instruction Manual

A Warranty Conditions

Raytech AG Switzerland shall at their option and expense, repair or replace any part or parts
that prove to be defective within the warranty limitation period- irrespective of the operating
time of the test equipment provided that the cause of the defect occurred before the time at
which the risk was passed.
Warranty claims are subject to a warranty limitation period of 24 months from the date of
shipment.
The purchaser is obligated to immediately notify Raytech AG Switzerland in writing of any
defects of the supplied test equipment.
Raytech AG Switzerland must always be allowed to rectify a defect within a reasonable
amount of time. The purchaser shall grant an adequate amount of time that the test
equipment shall be repaired.
Raytech AG Switzerland covers the costs associated with the repair of the defect; especially
the costs for the material and work. The cost for sending the faulty test equipment shall be
borne by the purchaser. Raytech AG Switzerland shall not be liable for material damage, or
financial loss due to the loss of production, loss of data, loss of information, data or interest,
regardless of their legal basis.
Warranty claim rights on replacement parts as well as repair of defective parts shall expire
after 12 months.
The warranty limitation period shall be extendable according to the price list. The purchaser
has the right to extend the warranty period by purchasing additional warranty years.
A.1 Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from:
•
Improper and unauthorized modifications or misuse and abuse of the product,
negligence, alteration, modification, faulty installation by the customer, customer's
agents or employees.
•
Attempted or actual dismantling, disassembling, service or repair by any person, firm,
or corporation not specifically authorized in writing by Raytech AG Switzerland.
•
Defects caused by or due to handling by the carrier, or incurred during shipment,
transshipment, or other moves.
•
Inadequate maintenance by the customer, the second source supplied software or
interfacing, operation outside the environmental limits, or improper site preparation.
Exclusive remedies provided herein are the customer's sole and exclusive remedies.
Raytech Switzerland shall not be liable for any damages resulting from the use of this
equipment whether direct, indirect, special, incidental, or consequential damages, or whether
based on contract, tort, or any other legal theory.
90297-0.24 Instruction Manual mini-ATOS
Preliminary
Page 119 of 125