To Load A File; Table 23.4 Waveform Data Header - Rigol DHO924S User Manual

23.3
DHO900 User Guide
1.888.610.7664
242
A 24-byte character array in the format of MODEL#:SERIAL#,
Model
indicating the oscilloscope's model and serial number.
A 16-byte character array that contains the label assigned to
Channel Name
the waveform.
3. Waveform Data Header
A waveform may have multiple data sets. Each waveform data set has a waveform
data header. The waveform data header consists of information about the
waveform data set. The header is stored before the data set.

Table 23.4 Waveform Data Header

A 4-byte integer, indicating the number of bytes in the
Header Size
waveform data header.
A 2-byte integer, indicating the type of the waveform data
stored in the file.
- 0 = Unknown
- 1 = Normal 32-bit float data
Buffer Type
- 2 = Maximum float data
- 3 = Minimum float data
- 4 = Not Used
- 5 = Digital unsigned 8-bit character data (for digital
A 2-byte short integer, indicating the number of bytes per
Bytes Per Point
data point.
An 8-byte long integer, indicating the number of bytes of the
Buffer Size
current channel waveform data.

To Load a File

In the storage setting menu, click or tap the Load tab to switch to the load menu. In
this menu, you can load the local file to the instrument.
www.calcert.com
15
10 20
5 25
0 30
channels)
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
sales@calcert.com