Rigol DHO924S User Manual page 39

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664
- If the channel is not displayed, you can press the channel key to open the
channel in the waveform view window.
- If the channel is displayed but not selected, you can press the channel key to
select the channel.
- If the channel is both displayed and selected, you can press the channel key
to close its display in the waveform view.
12. Probe Compensation Signal Output Terminal/Ground Terminal
This terminal outputs the probe compensation signal which helps you match a
probe's input capacitance to the oscilloscope channel to which it is connected.
13. Analog Channel Input Terminals
BNC connectors. Attach probes to these connectors for analog signal inputs.
14. Digital Channel Input Terminal
Attach logic probes to the interface for digital signal inputs.
15. USB HOST Port
This series supports USB storage device of FAT32/NTFS format and mouse.
- USB storage device: imports or exports data (software update, waveform,
setup, or captured image).
- Mouse: connects a mouse to control the instrument.
16. Power Key
Powers on/off the oscilloscope.
www.calcert.com
15
10 20
5 25
0 30
DHO900 User Guide
sales@calcert.com
23