DHO900 User Guide
1.888.610.7664
94
Figure 8.23 Nth Edge Trigger Setting Menu
After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Source Selection
Click or tap the Source drop-down button to select CH1-CH4 or D0-D15. For details,
Trigger Source
refer to
. The selected trigger source is indicated in the trigger
information label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source, can you
obtain a stable trigger.
Edge Type
Select the input signal edge (in the Slope item) on which the oscilloscope triggers.
•
Rising: triggers on the rising edge of the input signal when the voltage level
meets the specified trigger level.
•
Falling: triggers on the falling edge of the input signal when the voltage level
meets the specified trigger level.
www.calcert.com
15
10
20
5
25
0
30
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
sales@calcert.com